{"id":8340,"date":"2020-10-30T12:50:09","date_gmt":"2020-10-30T17:50:09","guid":{"rendered":"https:\/\/loopcommunity.com\/blog\/?p=8340"},"modified":"2020-10-30T12:50:10","modified_gmt":"2020-10-30T17:50:10","slug":"setting-up-track-rig-with-logic-pro","status":"publish","type":"post","link":"https:\/\/loopcommunity.com\/blog\/2020\/10\/setting-up-track-rig-with-logic-pro\/","title":{"rendered":"Setting Up Track Rig with Logic Pro"},"content":{"rendered":"\n

Track Rig<\/a> is an 8 channel audio interface that\u2019s great for running tracks. It\u2019s simplistic design makes it easy to set up in Logic Pro. It has eight XLR outputs so that you can get more control of your tracks, and go directly to your soundboard without any other hardware. Here\u2019s how to set it up!<\/p>\n\n\n\n

First, plug in your Track Rig<\/a> to your computer running Logic Pro. If you\u2019re using a Mac, Logic will automatically recognize that Track Rig is connected. After this, follow these easy steps in Logic.<\/p>\n\n\n\n

  1. Select \u201cLogic Pro\u201d in the top toolbar.<\/li>
  2. Select \u201cPreferences\u201d then click the \u201cAudio\u201d option.<\/li>
  3. Under Output Device, select \u201cLoop Community Track Rig\u201d.<\/li><\/ol>\n\n\n\n
    \"\"<\/figure><\/div>\n\n\n\n

    PC Configuration<\/strong><\/p>\n\n\n\n

    If you\u2019re using a PC, it works a little differently, but don\u2019t worry it only takes a couple minutes.
    1. Download the latest driver by going to the     web address<\/a> in your manual.
    2. Run the installation process for ASIO4ALL. Then restart your computer after the install is complete.
    3. In Ableton Live under Driver Type, select \u201cASIO\u201d. Then under Audio Output Device, select \u201cASIO4ALL v2\u201d. Now you\u2019re ready to go.<\/p>\n\n\n\n

    Routing the Tracks<\/strong><\/p>\n\n\n\n

    All you have to do now is route each track in Logic Pro to the desired output. To do so, first open Logic\u2019s mixer. You can do this by pressing the shortcut key \u201cX\u201d. Once the mixer is open, you will see each individual track. Within each track is the Stereo Out button, or \u201cSt Out\u201d for short. Click on a Stereo Out button, then go to \u201cOutput\u201d and select the output you want. Repeat these steps for all your tracks to successfully route them!<\/p>\n\n\n\n

    If you have a group of tracks that you want to all route together, you can route them at the same time by highlighting them all, then clicking on a Stereo out button.<\/p>\n\n\n\n

    \"\"<\/figure><\/div>\n\n\n\n

    And that\u2019s it! After routing all of your tracks from Logic Pro to Track Rig, you are ready to run your tracks in live performance. To learn more about Track Rig, visit TrackRig.com<\/a>.<\/p>\n\n\n\n

    \n